Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
Cotter Pin Joints are the traditional joint's used in Teddy Bear making, usually a set of 5 joint's are required for each Teddy Bear.
Alternatively:
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
Our 100 joint pack's will be sufficient for twenty bears.
5mm, 6mm & 7mm joints include; 10 fibreboard discs, 10 Steel discs & 5 extra small cotter pins (5 pack). **now with fibre discs**
8mm, 10mm, 12mm & 15mm joints include; 10 fibreboard discs, 10 steel washers & 5 cotter pins (5 pack).
18 - 76mm joints include; 10 hardboard discs, 10 steel washers & 5 cotter pins (5 pack).
